 |
| Add caption |
No Nama Peralatan Rasio Deskripsi Merek Type Harga @
1 Engine Sepeda Motor 2 Tak On Stand (Non Life) 5 unit/ruang praktik "untuk mempelajari dan mengenal mekanisme katup yang terdapat pada engine 2 tak
Feature
An educational unit for the 2 Stroke Cycle Engine Model.
The equipment is proper to explain each parts and operating principle of 2 Stroke Engine Model.
Incised sections are painted with different colors for education efficiency.
Painting and coating with Vehicle-Only materials.
Real 2 Stroke Engine is mounted and possible to check internal structure by precise cutting.
Able to check operation process of inner parts such as pistons, valves and crank.
LED light is on during explosion as optional accessory.
Specification
Composition : 2 Stroke Engine ASSY, AC 220V
Single phase 220V speed control motor is attached
Size : Approx. 400 X 400 X 400 mm
Weight : Approx. 35 kg Training Contents
Cycle Training, Suction/Exhaust, Structure.
Made from all new components (not recycled/repainting)
Desktop model, component placed on stainless plate
" YES01 YESA-2880 126.876.000
2 Engine Sepeda Motor 4 Tak On Stand (Non Life) 5 unit/ruang praktik "untuk mempelajari dan mengenal mekanisme katup yang terdapat pada engine 4 tak
Feature
An educational unit for the 4 Stroke Engine Model.
The equipment is proper to explain each parts and operating principle of 4 Stroke Engine Model.
Incised sections are painted with different colors for education efficiency.
Real 4 Stroke Engine is mounted and possible to check internal structure by precise cutting.
Able to check operation process of inner parts such as pistons, valves and crank.
Specification
Composition : 4 Stroke Engine ASSY
Single phase 220V speed control motor is attached
Size : Approx. 600 X 400 X 500 mm
Weight : Approx. 35 kg Training Contents
Stroke education, Intake, Exhaust structure.
Made from all new components (not recycled/repainting)
Desktop model, component placed on stainless plate
" YES01 YESA-2891 101.500.500
3 Valve Spring Compressor 5 unit/ruang praktik "untuk bongkar pasang katup-katup pada saaat perbaikan
Specifications:
Material: Steel
Each Adaptor Length: 4.7cm/1.8""
""C"" Clamp Size: 16 x 19cm/6.3"" x 7.5""
Extension Screws Size: 11.3cm/4.4"", 11.3cm/4.4"", 7cm/2.7""
Compression Bar Size: 10cm/3.9""
Storage Case Size: approx. 32 x 20 x 4cm/12.6"" x 7.8"" x 1.5""
Package Weight: Approx. 1.4kg
Fitment: For most car, small van, motorcycle engines
Package Included:
1 x Spring Compressor ""C"" Clamp
5 x Adaptors
3 x Extension Screws
1 x Compression Bar
1 x Storage Case" KERNEL HTW-1010 1.269.000
4 Engine Sepeda Motor 4 Tak Life with Fault Simulator 5 unit/ruang praktik "untuk mengetahui dan memahami kerja dari sistem pelumasan pada sepeda motor
Description
1) Type / Model: 4-stroke live engine model, with all components using NEW 100% part, not a remanufactured /recycled
2) Uses: To understand the workings and functions of each component on the motorcycle mechanically, electrically, and how the CVT (Continous Variable Transmisson) transmission works,
Equipped with Interface Module Box with fault diagnosis simulation, with LCD screen and there are buttons for input data
3) Engine
a) Engine type: SOHC, single cylinder, air cooling b) Fuel system: Fuel Injection / PGMFI c) cylinder volume: 108.2 cc d) Diameter x Step: 50x55.1 mm
d) Maximum power: 6.38Kw (8.68PS) / 7500 rpm e) Maximum torque: 9.01 Nm / 6,500 rpm
4) Transmission
a) Transmission: Automatic V Belt b) Clutch: Centrifugal dry type
5) General: The machine is held by the frame of precision Sturdy, handlebars and speedometer installed, and also comes with drip pan
6) Frame / holder
a) Material: Machine holder frame from 3mm iron plate material, main supporting frame of iron pipe material with 3.5 mm thickness and L plate for base frame with 1.5 mm thickness b) Surface: Manufacture painting/powder coating
7) Completed: Training Modules and Manuals
Training contens :
Learning EFI system on motorcycle ,Learning about CVT transmission
Learning about Ignition dan charging on motorcycle ,Auto fault simulation " RAKINDO ES-REVOFIT 44.113.500
5 Oil Pressure Tester 2 unit/ruang praktik "untuk mengukur tekanan dari oli pelumasan
Features:
Heavy duty gauge with protective rubber housing.
3.5'' diameter gauge with dual color coded scale, easy to read.
39'' oil proof rubber hose with 1/8"" NPT adapter.
Comes with 1/4"" NPT and 3/8"" NPT adapters.
Blow moulded carrying case for easy transportation and storage.
Specifications:
Case Color: Red
Material: Plastic & Metal
Dual Gauge Readings: 0~400psi, 0~28kg/cm2
Case Size: Approx. 32.5 x 27 x 6cm / 12.7 x 10.6 x2.4in
Case Weight: Approx. 1290g / 2.8lb
" TOMTOP 2.412.000
6 Motorcycle Lift 5 unit/ruang praktik "untuk mengangkat sepeda motor saat melakukan pergantian oli pelumas pada sistem pelumasan
Technical Data
All steel construction with foot operated, integral hydraulic pump and ram assembly.
Fitted with platform safety lock device to prevent accidental lowering.
Bike fixed by front wheel clamp.
Four eyelets allow tie downs to be used for added stability.
Fitted with a full width loading ramp.
500mm Removable rear panel to assist with rear wheel removal.
Can be stored in an upright position to save space when not in use.
Capacity: minimal 450kg
Minimum/Maximum Height: 205/750mm
Platform Width/Length: 333/2060mm ,air supply : 6-8 bar
Overall Width/Length: 800/2900mm
Weight: approx. 75kg " KERNEL KL-33006 13.537.500
7 Air Compressor 1 unit/ruang praktik "membantu membersihkan sisa sisa kotoran pada blok engine dan suplai udara utk alat angkat
Technical Data
Air Re-Tank 125 ℓ
Power 3 Hp (2.2Kw)
1Φ/4P/220V
Cylinder Volume 495 cc
Displacement 357 ℓ/min
Type & Pulley minimal Dia. A1 & 350 mm
Motor Pulley minimal Dia. 152.4mm
Charging Time 125 ℓ / 214 sec
Pump R.P.M 721
Working Pressure 6~8.5 Kgf/㎠
Motor R.P.M 1,715" KOHANDS KC752SN 37.188.000
8 Gas Analyer For Motorcycle 2 unit/ruang praktik "untuk mengukur kadar emisi buang sepeda motor sehingga dapat diketahui pembakaran sempurna atau tidak
MEASUREMENT :
NDIR(Non-dispersive infrared)and electronical
-CO (Carbon Monoxide)
-HC (Hydro Carbons)
STANDARD ACCESSORIES
-Exhaust probe and tap assembly
-Sample hose / power cord / moisture trap filter element
TECHNICAL DATA
- CO measurement range : 0-9.99% with 0.01% resolution
- HC measurement range : 0-9999 ppm with 1ppm res.- Ambient temperature : 0 – 40 C- Microprocessor control- Automatic zero and span adjustment
- Full digital display visible in any light
- LED indicators for all functions
- Membrane switches -Serial PC interface
- Fast response time- Automatic calibration
- Flow absence detector- Response time :10sec- Pre-heating time :app. 3-8min.
- Power supply :110/220/240Vac 50/60Hz" HESHBON HG-510 64.260.000
9 Special Tool For Motorcycle (Honda Motorcycle) 5 unit/ruang praktik "untuk bongkar pasang sistem bahan bakar bensin karburator untuk engine sepeda motor jenis HONDA
Durable Multifunctional Repairing Tools For Honda Motorcycle
Technical Data
Valve Spring compressor 1 pcs
Valve Spring compressor accessories 1 pcs,Valve Adjust Wrench 1 pcs
Long joint pole 1 pcs,Sleeve Wrench 20x24 1 pcs
Wrench Sleeve 30x32 1 pcs,magneto detacher 1 pcs
magneto detacher 1 pcs,magneto retainer 1 pcs
clutch fixer 1 pcs,open wrench 1 pcs,clutch central tray clamp 1 pcs
oil seal assembler 1 pcs,oil seal assembler 1 pcs,oil seal assembling sleeve 1 pcs
tool shelf(A) 1 pcs,gear wheel clamp 1 pcs,gear wheel clamp 1 pcs
screw fixing sleeve 1 pcs,crankshaft fixing tool 1 pcs,crankshaft assembler 1 pcs
assembled liner 1 pcs,box tools 1 pcs
timing chain datacher 1 pcs,valve maitaining grinder pole 1 pcs
valve maitaining grinder(24) 1 pcs,valve maitaining grinder(28) 1 pcs
valve maintaining pole 1 pcs,back shock compressor 1 pcs
ruler 1 pcs,back shock fixer 1 pcs
back shock fixer accessories 1 pcs
screw fixing wrench(30x40MM) 1 pcs,sleeves39x41MM 1 pcs
cluth spring compressor 1 pcs,screw fixing wrench 1 pcs
tool shelf(B) 1 pcs,tool box 1 pcs" KERNEL KL-HND-38 30.282.000
10 Special Tool For Motorcycle (Honda Motorcycle) 5 unit/ruang praktik "untuk bongkar pasang sistem bahan bakar bensin karburator untuk engine sepeda motor jenis YAMAHA
Motorcycle Repair Tools List
valve spring compressor 1 pcs
accessories A 1 pcs,accessories B 1 pcs, accessories C 1 pcs
Valve adjust wrench 1 pcs,detacher 1 pcs
crankshaft assembler (10mm) 1 pcs
crankshaft assembler (12mm) 1 pcs
crankshaft assembler 1 pcs
assembler accessory A 1 pcs,assembler accessory B 1 pcs
,assembler accessory C 1 pcs,clutch fixer 1 pcs
wrench accessories 1 pcs,wrench (4paws) 1 pcs
oil seal assembler 1 pcs,steel pan 1 pcs,clutch fixer 1 pcs
wrench (2paws) 1 pcs
clutch spring compressor 1 pcs,shelf 1 pcs
timing chain detacher 1 pcs,hook spanner 1 pcs
magneto puller (27mm) 1 pcs,magneto puiller(14mm) 1 pcs
conduit detacher 1 pcs,conduit detacher 1 pcs,box tools 1 pcs
piston detacher 1 pcs,oil seal detacher 1 pcs
detacher screw (6mm) 1 pcs,detacher screw (8mm) 1 pcs
rotor 1 pcs,fixed wrench 1 pcsrotor 1 pcs
screw detacher 1 pcs, detacher screw (8mm) 1 pcs shelf " KERNEL YMH-39 26.137.500
11 Mechanical Tool Set 5 unit/ruang praktik "alat bantu bongkar pasang sistem bahan bakar bensin karburator pada umumnya
Contains
3Drawer Portable Tool Cabinet,with specifications
Steel Thickness:
Bottom: minimal 0.8mm.,Drawers: minimal 0.7mm.,Drop-top cover: minimal1.0mm.
Weight loading Accepted: For drawer is around 10 kg. Hemmed edge for body to add strength and safety.
Quick released design on ball bearing slide can be easily removed for replacement.
One-piece main cabinet body shaped.
Automatically lock drawer when open top cover is closed.
Drawers are interchangeable.
100% open ball bearing slide. minimal 2mm Protective drawer liners.
Overall Size: approx. (W) 535 x (D) 220 x (H) 290 mm.
Consist of :
Drawer 1 :1/4"" dr socket : 4,4.5,5,5.5,6,7,8,9,10,11,12,13,14 mm
Extension bar 2"" & 4"",Sliding T Bar : 4-1/2"",Flexible Handle : 6""
Bent handle Ratchet,Universal joint,3/8"" Drive socket : 6,7,8,9,10,11,12,13,14,17,19,21mm,Extension bar 3"" & 6""
Sliding T bar : 8"",Flexible handle : 8"",Bent handle Ratchet
Universal joint,Adaptor : 3/8Fx1/4M
Drawer 2 contains :
Socket : 8,10,11,12,13,14,16,17,18,19,20,21,22,23,24,27,30,32 mm
Extension Bar : 5"" & 10"",Sliding T bar : 10"",Deep socket : 14,17,19,21,22 mm
Bent handle Ratchet,Universal joint,Sparkplug socket 16 mm
Drawer 3 contains :
Combination wrench : 6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24 mm" SPERO 10-23-1087 13.101.000
12 Pneumatic Air Impact Wrench 5 unit/ruang praktik "untuk mengencangkan/melepas baut yang membutuhkan kekuatan tinggi
FEATURES
Unique mini body, very easy to use in confined space.
With less effort to tear down the tires of cars and motorcycles.
Saves time when tightening and loosening bolts and nuts.
Special designed grip handle provides comfortable and stable operation.
SPECIFICATION
Square Drive: 1/2""
Max Torque: 500 FT-LB (650 Nm)
Free Speed: 11000 R.P.M.
Air Consumption: 4.2 CFM
Air Inlet: 1/4""
Air Pressure: 90 PSI
Overall Length: approx.122 mm
Net Weight: approx.1.4 kg
Air Hose: 10 mm
Mechanism : Jumbo Hammer
Noise Level (dBA) : 94
Head Length Min. 99 mm" SPERO 15-403-1 5.313.000
13 Electronic Wiring Diagram Simulator for Motorcycle 5 unit/ruang praktik "sistem simulasi pengkabelan semua kelistrikan pada sepeda motor
Used for learning about body wiring systems, electrical components,
and electrical systems in fuel injection (EFI), as well as to learn about early detection, troubleshooting,
and hazard prevention due to electrical connection fault on the motorcycle.
Minimum overall dimensons:1600 x 1280 x 600 (mm)
Minimum main board dimensions:1200 x 800 x 45 (mm)
Main power: 2A / 220V AC
Integrated on board modules embeded with interface connection board
Connection system: Bluetooth V.2 / 128kbps and USB
Upgradable modules and EWDS software" 150.000.000
14 Motorcycle Fuel Injection System Trainer 2 unit/ruang praktik "untuk memahami dan mengenal cara kerja sistem injeksi bensin dan komponen komponennya secara detail
Description
Features:
Made from all new components/parts, for training of electronic systems on motorcycles and understand the function of each component on a motorcycle especially PGM-FI system
Components:
injectors, 1 pcs ,fuel pumps, 1 pcs
spark plugs, 1 pcs ,coil, 1 pcs ,throttle body, 1 pcs
a bank angle sensor, 1 pcs ,engine oil temperature, 1 pcs
the pickup coil, 1 pcs ,ECM, 1 pcs
diagnostic connector, 1 pcs ,engine check, 1 pcs
12V - 3.5Ah batteries, 1 pcs ,starter switch, 1 pcs
accelerator control switch, 1 pcs
fuel tank 1.5 liters, 1 pcs
General: Panel with acrylic board or level
Frame: made from aluminum
Dimension: approx. 1810x840x690 mm
Accessories: training modul & instruction manual
Training Contents
Measure the waveforms and check the changes according to RPM speed.
Engine operation : check the operation of the injector and sparks
Flame intensity measurement by adjusting the ignition gap. " YES01 YESA-1800 50.751.000
15 Motorcycle Universal Diagnostic Tool 5 unit/ruang praktik "untuk mendiagnosa kerja dari sistem injeksi bensin pada sepeda motor,dan mendeteksi kesalahan yang terjadi pada sistem injeksi bensin sepeda motor
Features:
1.Through the USB cable to connect to the PC, run to the pc software to operate.
2.Connected to the PC through wireless module, Run to the PC software to operate, biggest communication distance can reach 100 meters.
3.Handheld,PC synchronizatin display operation
4.Support SD card to store data and to upgrade, Easy and Cnvenient
5.ReservedCAN BUS interface
6.3.2 inch TFT display, show clear
7.Support models: for S-YM, for K-YMCO,for Y-AMAHA,for P-GO,for S-UZUKI and for H-artford, for A-EON,for H-onda( more motor brands will be add in future).
Parameters:
1. Power: DC 10~15V 2. Working Current: 250mA
3. Screen: 160*105 LCD display 4. Keyboard: 6 membrane keyboard
5. Storage Temperature: -10~+85 6. Operating temperature:0~+70
7. Humidity: <90 8. Upgrade port: USB Port 9. Communication port: COM port
10. Support languages: simple Chinese, traditional Chinese, English, German, French, Italian, Japanese, Russian,
11. Turkish, Thai Language, Vietnamese.
12. Ports: diagnostic port, COM port, USB port, Power port.
Function:
1. System Information 2. Data stream
3. Read DTCs 4. Clear DTCs
5. Freeze data 6. CO Idle speed adjustment
" KERNEL MCT-500 18.310.500
16 Motorcycle Injector Tester & Cleaner 5 unit/ruang praktik "menguji dan membersihkan injektor yang kotor agar ,semprotan yang ditimbulkan merata
Functions:
1.Ultrasonic cleaning , dismantle the carbide of the injector;
2.injector test. stimulate engine runing condition, test injector in different speed range, Check and test injectors's injection situation:atomization/sprayingangle/spraying mount/spraying uniformity;
3.leakage and block test;
4.Uniquely designed various compound bonder for all kinds of side-inlet injectors;
5.With reverse flush function, to clean inside out, to improve clean efficiency;
6.With a set of adaptors to clean injectors without dismantling it from the engine;
Specifications::
Turning speed range 0~7500r/min
Timing pulse iength 0~9900times/step length 100
Pulse iength 0-20ms step length 0.1ms
Timing 0~10min
System pressure 0~0.6Mpa ,Ultrasonic cleaning power 70W
Power supply AC220+-10% 50/60Hz ,Working temperature 10°C~40°C
Stimulant signals 0+-5V ,Output scope of the pulsed signals +5V,+12V" KERNEL MST-30 13.005.000
17 Impact Die Grinder & Cutting Set 2 unit/ruang praktik "untuk membersihkan kerak/endapan karbon/lainnya yang terdapat pada sistem transmisi
FEATURES
Lightweight and small for using with less effort. Permits to cut transformed screws.
Convenient for grinding and polishing in a restricted space. Easy RPM adjustment
With a mini oil bottle designed to minimize wearing of repetitive operation.
SPECIFICATION
Polishing Head
Maintaining Tools
Valves wrench: J Type x 1; E Type x 1 (For replace pad or disc)
2-1/2"" Cutting Wheel x 5 (Cutting iron or steel)
#120 2"" Sand Paper x 3 (Polish steel surface)
2"" Rubber Pad Adaptor x1 (to attaché pad or disc)
2"" Scourer Sanding Pad x2 (to remove paint or rust)
2"" Wool Sanding Pad x1 (Polish Acrylic surface)
2"" Abrasive Buffing Wheel x1 (to remove tough paint or rust)
2"" 3M Scotch-Brite Roloc Bristle Disc x1 (to remove glue of Aluminum surface)
2.5"" Grinding Disc x1 (Polish steel surface)
Pneumatic Tool Oil - 10ml x1 (Lubricate the tool from inlet) " SPERO 15-901-916BM 4.623.000
18 Retractable Air Hose Reel 2 unit/ruang praktik "untuk menyalurkan udara bertekanan,untuk memenuhi kebutuhan daya dari alat gerinda yang digunakan untuk membersihkan sistem transmisi
Features
Compact and light weight, ideal for space restricted installations.
Wall or ceiling mount.
Reels come complete with urethane braid inlet hose, ball stop and complete mounting hardware.
Redesigned steel ratchet and gears for long life.
Solid brass axel.
Easy coupling - makes replacing hose fast and easy.
quick repair outlet fitting.
Outlet fitting cover included.
Size: Min. 6.5mm X 10.0M" TOUMORI 68010A 3.808.500
19 Brake Fluid Tester 5 unit/ruang praktik "mendiagnosa kualitas minyak rem dan menentukan jenis DOT-nya
Specifications:
Power Supply:3V
Testing Scope:DOT3, DOT4, DOT5
LED Light:5M (5.47yd)
Suction:1000G
Temperature: -30 degree+ 198 degree
Probe: 12x4mm (0.47x0.16in)
Package includes:
1pc x Brake Fluid Liquid Tester
1pc x Carrying Case" 5.392.500
20 Motorcycle Wheel Balancer 1 unit/ruang praktik "untuk mengetahui keseimbangan dari roda dan pelek ,dan dapat mengetahui jenis peleknya
Features:
High-precision of self-adhesive weight position finding
Various balancing modes: normal, static, ALU1, ALU2, ALU3
Self-calibration
Unit system: inch/mm, gram/ounce
Power supply 110V/220V
Motor power 185-320W
Balancing speed 190rpm
Balancing precision ±1g
Rim diameter 265-615mm
Rim width 40-510mm
Max wheel weight 70kg
Net weight approx.100Kkg
Packing Size approx. 650x990x1010mm" KERNEL CH 5204 41.650.500
21 Motorcycle Tyre Changer 1 unit/ruang praktik "untuk bongkar pasang ban sepeda motor
Motor power1.1/0.75kw
Max wheel diameter41”(1040mm)
Max wheel width14”(355mm)
Outside clamping10”~21”
Inside clamping12”~24”
Air supply8-10bar
Bead breaker force 2500kg
Noise level<70dB
Power supply110/220/380V, 50/60Hz
Net weight / Gross weightappro.218/248kg
Packing dimension approx. 1080x900x960mm
Features:
1, Swing arm for minimum space requirement;
2, Self-centering four-jaw turntable controlled via two clamping cylinders for correct clamping of the wheel;
3, Bead breaker with large anti-skid rubber pad;
4, Locking rim from 10”-24”;
5, Large bead breaker blade.
" KERNEL 103819 35.700.000
22 Digital Multimeter 5 unit/ruang praktik "mengukur voltage,arus,hambatan rangkaian elektrik sistem penerangan
DC Voltage (V) 400mV/4V/40V/250V ±(0.8%+1)
AC Voltage (V) 4V/40V/250V ±(1.2%+3)
DC Current (A) 400μA/4000μA/40mA/400mA/4A/10A ±(1%+2)
AC Current (A) 400μA/4000μA/40mA/400mA/4A/10A ±(1.5%+5)
Resistance (Ω) 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ ±(1%+2)
Features
Display Count 4000
Auto Range √
Diode √
Transistor √
Continuity Buzzer √
Low Battery Indication √
Input Impedance for DCV Around 10MΩ √
General Characteristics
Power 1.5V Batteries (R03)×2
LCD Size 48mm×16mm
Product Color Red and grey
Product Net Weight approx. 179g (Including Holster)
Product Size appro. 130mm×73.5mm×35mm
Standard Accessories Batteries, Test Lead, Holster" UNI-T UT-33A 634.500
23 Motor Starter & Alternator Test Bench 1 unit/ruang praktik "untuk mendiagnosa kekuatan motor starter,mengetahui voltage dan arus yang diterima maupun yang dikeluarkan oleh motor starter
Feature
An practice unit through which students can practice the principles of
basic composition circuit of relay and power distribution of ignition switch
with education purpose of basic electric and electronic system.
All components are from an actual vehicle.
Able to attach/detach the module and test.
The voltage and current gauge allow student to observe the difference
between ON and OFF.
Specification
Composition
1) Voltage meter : 50V (digital type)
2) Current meter : 500A (digital type)
3) Stand : 1ea, Tester cable clip, Operation lamp, Switch, Generator motor
Size : Approx. 700 X 700 X 1,200 mm
Weight : Approx. 100 kg
Training Contents
when the generator is on/off, measure the V,I.
Test for generator, start motor failure, diagnosis test.
Attach/detach training." YES01 YESA-4501 229.009.500
24 Ignition Coil Tester 5 unit/ruang praktik "untuk mendiagnosa kerusakan CDI/Coil pada kendaraan
This test unit is capable of testing:
Standard ignition coils
Ignition coils and coil packs with integrated module
Waste spark coil packs
Coil over plug individual units,Power supply: 12V DC via vehicle battery or separate power supply. (Not included)
KIT INCLUDES:
Ignition Coil Tester 12V
High-Voltage Leads (Red x 1, Black x 1)
Discharge Electrodes (Metal x 1, Plastic x 1)
2-Core Cable for testing ignition coils WITHOUT module
3 Core Cable for testing ignition coils WITH module
User Manual
Bonus - Ignition Coils and Modules Pin Out Diagrams booklet" Plus Equip EQP-112 20.301.000
25 Motorcycle Charging System Simulator 5 unit/ruang praktik "
untuk mempelajari cara kerja sistem pengisian pada sepeda motor dan dapat menganalisa gangguan pada sistem pengisian tersebut
Able to understand composition of Generator (alternator)System and fundamental on motorcycle
Components such as an ignition switch, relay used in this unit are from an actual motorcycle.
Able to attach/detach the generator by making the fixtures thenavailable for the test.
Simulator panel is made for understanding the circuit.
Able to check the charging status when the charging motor is on.
Specification
Composition
1) Voltage meter 2) Current meter 3) Generator stand : 4) Tester cable clip : 2ea
5) Lamp and switch attached6) Generator staring motor
Size : Approx. 500 X 500 X 1,200 mmWeight : Approx. 50 kg
Training Contents
Checking the charging status when the charging motor is on.
Measure the voltage wave patterns according to each socket.
" RAKINDO CSS-010N 11.812.500
26 Armarture Testing Growler 2 unit/ruang praktik "untuk mendiagnosa alternator/spul motor apakah masih kuat berputar atau tidak
Input voltage: Single phase 1ph AC 220V, 50 / 60Hz
Measuring current range testing current: 2A
Test range Testing range: 40 ~ 120Ø
Test voltage Testing voltage: 24V
Product Size Dimension: approx. (W) 160 x (L) 190 x (H) 250 mm
Product Weight Weight: approx. 6.6Kg" KOENG SY-AT11 23.625.000
1.11.2 TEKNIK BISNIS SEPEDA MOTOR
No Nama Peralatan Merek Type Harga @
1 Engine Sepeda Motor 2 Tak On Stand (Non Life) YES01 YESA-2880 126.876.000
2 Engine Sepeda Motor 4 Tak On Stand (Non Life) YES01 YESA-2891 101.500.500
3 Valve Spring Compressor KERNEL HTW-1010 1.269.000
4 Engine Sepeda Motor 4 Tak Life with Fault Simulator RAKINDO ES-REVOFIT 44.113.500
5 Oil Pressure Tester KERNEL OPT 2.412.000
6 Motorcycle Lift KERNEL KL-33006 13.537.500
7 Air Compressor KOHANDS KC752SN 37.188.000
8 Gas Analyer For Motorcycle HESHBON HG-510 64.260.000
9 Special Tool For Motorcycle (Honda Motorcycle) KERNEL KL-HND-38 30.282.000
10 Special Tool For Motorcycle (Honda Motorcycle) KERNEL KL-YMH-39 26.137.500
11 Mechanical Tool Set SPERO 10-23-1987 13.101.000
12 Pneumatic Air Impact Wrench SPERO 15-403-1 5.313.000
13 Electronic Wiring Diagram Simulator for Motorcycle 150.000.000
14 Motorcycle Fuel Injection System Trainer YES01 YESA-1800 50.751.000
15 Motorcycle Universal Diagnostic Tool KERNEL MCT-500 18.310.500
16 Motorcycle Injector Tester & Cleaner KERNEL MST-30 13.005.000
17 Impact Die Grinder & Cutting Set SPERO 15-901-916BM 4.623.000
18 Retractable Air Hose Reel TOUMORI 68010A 3.808.500
19 Brake Fluid Tester KERNEL MS8211 5.392.500
20 Motorcycle Wheel Balancer KERNEL CH 5204 41.650.500
21 Motorcycle Tyre Changer KERNEL 103819 35.700.000
22 Digital Multimeter UNI-T UT-33A 634.500
23 Motor Starter & Alternator Test Bench YES01 YESA-4501 229.009.500
24 Ignition Coil Tester Plus Equip EQP-112 20.301.000
25 Motorcycle Charging System Simulator RAKINDO CSS-010N 11.812.500
26 Armarture Testing Growler KOENG SY-AT11 23.625.000
Untuk
pemesanan atau informasi silahkan hubungi alamat kontak kami :
CV.ASAKA PRIMA | DUTA MEDIA GROUP.
PERCETAKAN & DISTRIBUTOR ALAT LAB & PERAGA PENDIDIKAN.
Jl.Maulana Hasanudin No.52 Cipondoh - Kota Tangerang
PERCETAKAN & DISTRIBUTOR ALAT LAB & PERAGA PENDIDIKAN.
Jl.Maulana Hasanudin No.52 Cipondoh - Kota Tangerang
Cabang : Ruko Pondok Permata No.1, Jl.
Raya Tanggul, Rajeg Mulya, Rajeg, Tangerang, Banten 15540
021 5570 1397
021 5570 2265
0813.1019.7873
WA.0812.1236.8589
WA.0877.7432.4146
0813.8053.7399
www.asakaprima.net
asakaprima@gmail.com
021 5570 1397
021 5570 2265
0813.1019.7873
WA.0812.1236.8589
WA.0877.7432.4146
0813.8053.7399
www.asakaprima.net
asakaprima@gmail.com
